How to improve the surface roughness of honed cylinder tubes
If the cylinder is expressed as 16×320, it means that the cylinder bore is 16 mm and its stroke is 320 mm. In addition, if they are from different manufacturers, the inner and outer diameters of the honed cylinder tubes are different.
If the material of the honed cylinder tube is aluminum alloy, then its color will be silver after sandblasting, and its surface will be very smooth. As for the wall thickness of this kind of cylinder tube and the pressure, there is a relationship, and the relationship between the two is directly proportional.
If the cylinder diameters are the same, then whether the threads of the air pipe interface are consistent mainly depends on whether the cylinder is a standard cylinder. If it is a standard cylinder, then it is consistent. As for the specific method to improve the surface roughness of the honed cylinder tube, you can use fine sand to grind it or perform mirror processing to achieve the goal.
Please indicate the source when reprinting:http://www.czbqyy.com/