Why do honing tubes get scratched?
Honing is mainly used to process hole diameters, usually cylindrical holes, such as cylinder barrels, valve holes, connecting rod holes, box holes, etc. The processing size is generally 5-500mm, and can be larger. And under certain conditions, it can also process outer circles, flat surfaces, spherical surfaces, and tooth surfaces. Its surface roughness can reach Ra0.32-0.08 microns. If honed, it can reach less than Ra0.04 microns. Therefore, this processing method seems to be the most commonly used at present, and the equipment used is generally a honing machine.
(1) If the honing tube is scratched, what is the main reason?
Answer: If it is scratched, there are three main reasons, which are the material problem of the workpiece itself, the problem of the honing rod or the honing head, and the problem of the machine tool honing fluid. As for the specifics, I will not analyze it in detail here.
(2) Can it be used directly after welding?
Answer: The honing pipe cannot be used directly after welding, because various problems will occur.
(1) If the honing tube is scratched, what is the main reason?
Answer: If it is scratched, there are three main reasons, which are the material problem of the workpiece itself, the problem of the honing rod or the honing head, and the problem of the machine tool honing fluid. As for the specifics, I will not analyze it in detail here.
(2) Can it be used directly after welding?
Answer: The honing pipe cannot be used directly after welding, because various problems will occur.